Smart Home Products

LED-AMP is a simple amplifier that works on the principle of input=output. It is designed for use with LED strips or other LED light devices.

This module allows interpretation of controlling signals from IO connections for 12/24V LED/RGB strips.

Wall-mounted control panel

Wall-mounted control panel

Video intercom calling panel. It has a built-in NFC reader, a 1MP camera with IR illumination and a relay for connecting the electric lock. It also has a built-in 6Gb memory for taking photos or recording videos. Supports SIP and DLNA protocols.

Multiroom system media point with a built-in amplifier. Used to play music, the Internet radio, system notifications. Supports DLNA protocol. Can be used either within the Smart Home system or separately

This is a sensor that works with our BT-CAN bluetooth module.The sensor shows the temperature and humidity.

This module contains motion, lighting (CW-MLI only) sensors and an IR transmitter (CW-MLI only).

Contains temperature, lighting, and humidity sensors.

Wall temperature sensor for DW-HCxx module

Open-frame temperature sensor.

This is an underfloor heating temperature sensor, it can also be used to measure the outdoor temperature.

Water leakage sensor with an alarm light, mountable in the floor surface. Used together with DW-WL or BW-LSA modules.

The sensor is placed on the floor surface. It has an alarm light, which changes from green to red if the sensor detects water on the floor.

This module contains motion, lighting, humidity, temperature, CO2 sensors and an IR transmitter.

This module contains motion sensor, lighting sensor, and an IR transmitter.

Motion sensor which can be connected to the Metaforsa series modules.

This module is used to connect to remote devices via Bluetooth.

This module is designed for integration Mitsubishi AC (connector CN105, CN92), Daikin AC (connector S21) to the Smart Home system.

This module is an adapter for connecting NEST thermostat to the Smart Home system.

The module is designed for connection of other digital devices which do not have standard interfaces

This module allows connecting devices with 0-10V input interface to the Smart Home system. Home system.

This module is designed for interface adjustment between the devices which have the UART interface (TTL levels) and the Smart Home system.

This module is designed for interface adjustment between the devices which have the RS232 interface and the Smart Home system.

This module is designed for interface adjustment between the devices which have the RS485 interface and the Smart Home system. The module has an internal 120Ω terminator resistor.

Allows connecting two leakage sensors, has the function of detecting the presence of the sensor.

This module is used to connect buttons/reed switches.

All outputs have an internal 1KΩ resistor therefore, the brightness of the LEDs will be slighty diminished when each next LED will be switched on

This module allows controlling RGB strip or three monochrome LED strips.

This single-channel dimmer is designed for smooth control of electrical load (non reactive load).It has 3 input channels for connecting buttons and reed switches. MOSFET type.

Compact size (only 16mm thickness)6 inputs support:ButtonsSwitchesreed switchesLED buttonsDigital temperature sensorOutputs support:LightsNC/NO heating valvesNC/NO locks

This module can support up to 14 buttons/reed switches/LED buttons/leak sensors/motion sensors/temperature sensors/led strips/rgb strips/WS2812B strips.

This module is designed for interface adjustment between the AC which have the UART interface (TTL levels) and the Smart Home system.

This module allows connecting devices with 0-10V input interface to the Smart Home system.

This module is designed for interface adjustment between the devices which have the UART interface (TTL levels) and the Smart Home system.

This module is designed for interface adjustment between the devices which have the RS232 interface and the Smart Home system.

This module is designed for interface adjustment between the devices which have the RS485 interface and the Smart Home system. This module has an internal 120Ω terminator resistor.

This module allows controlling DALI devices from the Smart Home system.

This module can support up to 15 buttons/reed switches or 8 LED buttons.

The module supports the connection of 2 valves of water supply shutoff and 4 leakage sensors.

This module provides control of curtains, projector screens, valves or other electrical motors with force control.

The module allows connecting RGB and monochrome LED strips.

The device is designed for controlling heating devices (radiators, floor heating, fan coil units, etc.).The device is equipped with 10 inputchannels for connection of temperature sensors.

This module is designed for smooth adjustment of brightness of lighting devices (non reactive load).The dimmer type is MOSFET with trailing edge dimming.Like all Larnitech devices, this dimmer controller is automatically detected and configured when it is added to the system. A logical unit within makes it possible for the unit to perform scripts from Larnitech’s large and constantly updated database and to operate on distributed logic, ensuring the reliability of its operation. Advanced LED light settings allow choosing the brightness required (from starter to maximum), while soft start mode prolongs lamp life. In addition to featuring protection in a range of parameters.

This module is designed for smooth adjustment of brightness of lighting devices (non reactive load). The dimmer type is MOSFET with trailing edge dimming.Like all Larnitech devices, this dimmer controller is automatically detected and configured when it is added to the system. A logical unit within makes it possible for the unit to perform scripts from Larnitech’s large and constantly updated database and to operate on distributed logic, ensuring the reliability of its operation. Advanced LED light settings allow a more precise setup, while soft start mode prolongs lamp life. In addition to featuring protection in a range of parameters.

This module is designed for smooth adjustment of brightness of lighting devices (non reactive load). The dimmer type is MOSFET with trailing edge dimming.Like all Larnitech devices, this dimmer controller is automatically detected and configured when it is added to the system. A logical unit within makes it possible for the unit to perform scripts from Larnitech’s large and constantly updated database and to operate on distributed logic, ensuring the reliability of its operation. Advanced LED light settings allow a more precise setup, while soft start mode prolongs lamp life. In addition to featuring protection in a range of parameters.

This module has 5 outputs for connecting load and 12 inputs for connecting various sensors/buttons.

Has 7 outputs for connecting loads and 12 inputs for connecting various sensors/buttons.

Has 12 outputs for connecting loads and 24 inputs for connecting various sensors/buttons.

This module is designed for high power AC/DC circuits commutation.Used for light, power sockets and other electrical devices.This universal unit is able to control lights, various types of valves, blinds, gates, locks and fan coil units, etc. The relay is a low-noise one and features special high-performance contacts rated for 120A 20ms inrush current. Like all Larnitech devices, this control unit is automatically detected and configured when it is added to the system. DW-LC contains a logical unit, which makes it possible for the unit to perform scripts from Larnitech’s large and constantly updated database and to operate on distributed logic, ensuring the reliability of its operation.

This module is designed for high power AC/DC circuits commutation.Applicable for light, power sockets, for control of fan coil units, locks, blinds/gates.This universal unit is able to control lights, various types of valves, blinds, gates, locks and fan coil units, etc. The relay is a low-noise one and features special high-performance contacts rated for 120A 20ms inrush current. Like all Larnitech devices, this control unit is automatically detected and configured when it is added to the system. DW-LC contains a logical unit, which makes it possible for the unit to perform scripts from Larnitech’s large and constantly updated database and to operate on distributed logic, ensuring the reliability of its operation.

This module is designed for high power AC/DC circuits commutation. Applicable for light, power sockets, for control of fan coil units, locks, blinds/gates.This universal unit is able to control lights, various types of valves, blinds, gates, locks and fan coil units, etc. The relay is a low-noise one and features special high-performance contacts rated for 120A 20ms inrush current. Like all Larnitech devices, this control unit is automatically detected and configured when it is added to the system. DW-LC contains a logical unit, which makes it possible for the unit to perform scripts from Larnitech’s large and constantly updated database and to operate on distributed logic, ensuring the reliability of its operation.

METAFORSA SMART HOUSE is a ready-made solution for automation of residential and commercial premises, hotel complexes which includes the most highly desired features of Smart House.The device has 10 control channels, 4 dimming channels and 28 input channels qty.Metaforsa can be controlled via cloud with a securely encrypted signal. The system history from all other devices and sensors is stored on the device for one year. Its plug and play feature means that it automatically detects and configures new Larnitech devices that are added to the system. A large and constantly updated database of ready-made scripts ensures that your home is able to satisfy your most complex requests. This universal unit is able to control lights, various types of valves, blinds, gates, locks and fan coil units (see full list below). Get things going by telling your home what to do with the help of Siri, Alexa or Google Home. Get push notifications on your phone whenever the system has things to tell you and enjoy the ultimate control at your fingertips. The Metaforsa kit is ready to be installed and serve your needs as soon as you take it out of the box!

This module is used to connect two additional CAN networks to the system. It also converts Ethernet into CAN bus and vice versa.

It is used for accumulation and storage of system data. The device determines the logical scheme of the system and allows authorized access to the system via the Internet. It also converts Ethernet into CAN bus and vice versa. DE-MG has a built-in IR receiver.The DE-MG can be controlled via cloud with a securely encrypted signal. The system history from all other devices and sensors is stored on the DE-MG for one year. Its plug and play feature means that it automatically detects and configures new Larnitech devices that are added to the system. A large and constantly updated database of ready-made scripts ensures that your home does everything your heart may desire. Get things going by telling your home what to do with the help of Siri, Alexa or Google Home. Get push notifications on your phone whenever the system has things to tell you and enjoy the ultimate control at your fingertips.

It is used for accumulation and storage of system data. The device determines the logical scheme of the system and allows authorized access to the system via the Internet. It also converts Ethernet into CAN bus and vice versa. DE-MG has a built-in IR receiver.The DE-MG can be controlled via cloud with a securely encrypted signal. The system history from all other devices and sensors is stored on the DE-MG for one year. Its plug and play feature means that it automatically detects and configures new Larnitech devices that are added to the system. A large and constantly updated database of ready-made scripts ensures that your home does everything your heart may desire. Get things going by telling your home what to do with the help of Siri, Alexa or Google Home. Get push notifications on your phone whenever the system has things to tell you and enjoy the ultimate control at your fingertips.